Yes, the PCMK 2 HE TKL keyboard is a hot-swappable model with magnetic switches, allowing for easy switch replacement.  This keyboard supports a variety of...

The strength and height of the magnets vary depending on the manufacturer and model of the magnetic switches. In magnetic keyboards, fine-tuning the precis...

This keyboard supports both N-pole and S-pole magnetic switches.  When using pre-tuned switches, both polarities can be used without any issues. .

Switch Replacement Procedure Disconnect the USB power cable. Remove the keycap and replace the switch. Connect the USB and run the 'Bibimbap' WE...

This keyboard supports an 8k polling rate, so it's important to use USB High Speed correctly. As the cable length increases, resistance also increases....

You can toggle the Quick Tap (SOCD) function ON/OFF using the FN + (L)SHIFT combination, with A and D keys supported by default. When the combination keys ...

Press and hold FN + ESC for 3 seconds to perform a factory reset. During this process, the entire keyboard LED will change to red. Please ensure not to pr...

This issue can arise from various causes, including switch settings, power supply problems, USB cable quality, and foreign matter entering the keyboard. If...

Please check if you are using a KVM. Some KVMs have virtual keyboard devices that may interfere with the recognition of the actual keyboard device name. I...

You can switch between 3 profiles using FN + 1, 2, or 3. Each profile is indicated by different colors on the ID Tag logo LED: Profile 1: Purple Prof...