Checking if Your Mouse Double Clicks

If you are experiencing issues with your mouse double clicking, there are a few simple steps you can take to diagnose and fix the problem. Here is a step-by-step guide to help you troubleshoot your mouse:

1. Hold your mouse flat on a surface and show that you are using only one finger by folding the other fingers.

2. Click on the middle of the button, at the level of the wheel.

3. If your mouse is double clicking, you can perform a chattering test using this link: https://codepen.io/blink172/pen/vERyxK

Fixing the Double Clicking

If you have determined that your mouse is double clicking, there are a few things you can do to fix the problem:

1. Clean your mouse switches: Dust trapped under the switches can cause double clicking. In some cases, double clicking can be fixed by cleaning the mouse using compressed air.

2. Increase debounce rate: Double clicking can be caused by slight vibrations and can be solved by changing the debounce rate when the double clicking is minor.

3. Changing the switches: If the previous methods did not solve your issue, your switches are most likely defective and need to be replaced.

Replacing Switches

If your warranty is valid and you bought from Pulsar GG, please contact us on pulsar.gg/support. 

We will ask you to fill in some forms, and then send you a Shipping label, to send your mouse to our repair center. 

This will take 2-3 weeks.

Otherwise, if you wish to fix the switches yourself, here is some useful information. 

The switches used on our Xlite and X2 mice are KAILH 8.0 switches, they can easily be purchased online. 

You can also use other similar switches that have the same 3 pin layout. 

You will also need soldering tools.

Here is a Youtube tutorial of how to solder new switches: https://www.youtube.com/watch?v=ul2TeEudAFA&ab_channel=Ents

We hope this guide has been helpful in resolving your mouse double clicking issues. 

If you have any further questions or concerns, please do not hesitate to contact us.